Note flashes per kWh

Step 1

1. Go to your electricity meter
2. Find number of flashes pr. kWh, often shown as imp/kWh
3. Write down the number for later
4. Is your Electricity meter not shown above, please look for the imp/kWh or the LED

Find your remote

Step 2

1. The remote is the unit that says “REMOTE”

Mount the Remote

Step 3

1. Turn your Remote over and remove the plastic from the adhesive pad
2. Mount the Remote on the electricity meter so that the small hole in the corner aligns with the pulse diode (see below)
3. If your meter is not shown, then turn on, for example, your oven and look for the LED that blinks rapidly – this is your pulse diode

Placement on your electricity meter

Use the illustrations below to locate the pulse diode and the placement of your Saveeye.

Now the Base

Step 4

Base is the unit marked “BASE”

Connect the Base

Step 5

1. Insert the Micro-USB-cable into the Base
2. Plug the cable into a power outlet
3. Place your Base no more than 8 meters from your Remote

Connect to WiFi

Step 6

1. Download the Saveeye app from the Appstore or Google Play Store using the QR code below
2. Open the Saveeye app, select Devices, and then press Scan new device to start the setup